You are not logged in.
Dear,
I recently switched to Wayland on my ThinkPad X1.
I have the following graphic hardware:
00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-P [Iris Xe Graphics] (rev 04)On X11, I use to have the following modes and resolutions available:
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 16384 x 16384
eDP-1 connected primary 1920x1200+0+0 (normal left inverted right x axis y axis) 302mm x 189mm
1920x1200 60.00*+ 59.95
1920x1080 59.93
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1440x810 59.97
1368x768 59.88 59.85
1280x800 59.97 59.81 59.91
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32On Wayland (Sway WM) I have only access to the following ones:
eDP-1 "California Institute of Technology 0x1404 (eDP-1)"
Make: California Institute of Technology
Model: 0x1404
Physical size: 300x190 mm
Enabled: yes
Modes:
1920x1200 px, 60.000999 Hz (preferred, current)
Position: 0,0
Transform: normal
Scale: 1.000000
Adaptive Sync: disabledFrom Wayland, the Raptor Lake-P does not seems to be properly recognized.
I am not able to access to all modes and resolutions available on X11.
I have tried also with the Niri compositor but same issue (seems more related to Wayland).
Last edited by isupefy348 (2026-03-22 08:13:25)
Offline