You are not logged in.

Pages: 1

#1 2026-04-25 15:36:09

loan34k
Member
Registered: 2026-04-18
Posts: 11

HDMI external monitor limited to 1680x1050

Hello, I'm having an issue with my external monitor (ASUS VG27WQ) when I plug it in, it is detected by my laptop (Lenovo 500w 2-in-1 Gen 5) but my external monitor is showing "no signal".
My screen supports 2560x1440@165Hz. And my pc output is limited to ASUS 2560x1440@60Hz and 1920x1080@120Hz

I tested other resolutions and refresh rates and it seems that the higher resolution that is working is 1680x1050 at 59,88Hz

I'm pretty sure that it isn't an hardware issue because when I was on windows, it worked perfectly on 2560x1440@60Hz and 1920x1080@120Hz

Any idea what could cause this, or how to make the higher resolutions work properly ?

Offline

#2 2026-04-25 17:52:04

Magrid
Member
From: Italy
Registered: 2025-06-10
Posts: 16
Website

Re: HDMI external monitor limited to 1680x1050

Could it be a driver issue? Try updating you system and see if the problem persist.

Feel free to send me an email if you need anything!

Offline

#3 2026-04-25 18:27:15

loan34k
Member
Registered: 2026-04-18
Posts: 11

Re: HDMI external monitor limited to 1680x1050

Magrid wrote:

Could it be a driver issue? Try updating you system and see if the problem persist.

I updated multiple times, re installed all the drivers but the error persists

Offline

#4 2026-04-25 18:31:25

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,850

Re: HDMI external monitor limited to 1680x1050

Please post your complete system journal for the boot: 

sudo journalctl -b | curl -s -H "Accept: application/json, */*" --upload-file - 'https://paste.c-net.org/'

Is this on X11 or some wayland compositor (=> which specifically)?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2026-04-25 20:22:51

loan34k
Member
Registered: 2026-04-18
Posts: 11

Re: HDMI external monitor limited to 1680x1050

seth wrote:

Please post your complete system journal for the boot: 

sudo journalctl -b | curl -s -H "Accept: application/json, */*" --upload-file - 'https://paste.c-net.org/'

Is this on X11 or some wayland compositor (=> which specifically)?


First : there is the output of journalctl -b : https://paste.c-net.org/MuggedBeside

and iḿ on kwin (kde plasma wayland). but the issue is also on xfwm4 or any other compositor

Offline

#6 2026-04-25 20:37:38

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,850

Re: HDMI external monitor limited to 1680x1050

Single GPU, alder lake i915

avril 25 10:37:46 arch kernel: Linux version 6.19.13-zen1-1-zen (linux-zen@archlinux) (gcc (GCC) 15.2.1 20260209, GNU ld (GNU Binutils) 2.46) #1 ZEN SMP PREEMPT_DYNAMIC Tue, 21 Apr 2026 23:38:05 +0000
…
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device /dev/dri/renderD128
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
…
avril 25 21:59:52 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:00:43 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:00:43 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:00:54 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:00:54 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:02:32 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:02:32 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
ls -lR /sys/class/drm
glxinfo -B

and from your previous attempts you'll still have an xorg file (likely /var/log/Xorg.0.log), please post that as well.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2026-04-26 07:20:07

loan34k
Member
Registered: 2026-04-18
Posts: 11

Re: HDMI external monitor limited to 1680x1050

seth wrote:

Single GPU, alder lake i915

avril 25 10:37:46 arch kernel: Linux version 6.19.13-zen1-1-zen (linux-zen@archlinux) (gcc (GCC) 15.2.1 20260209, GNU ld (GNU Binutils) 2.46) #1 ZEN SMP PREEMPT_DYNAMIC Tue, 21 Apr 2026 23:38:05 +0000
…
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device /dev/dri/renderD128
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
avril 25 19:09:19 arch kwin_wayland[1656]: Failed to open drm device 
…
avril 25 21:59:52 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:00:43 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:00:43 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:00:54 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:00:54 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:02:32 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
avril 25 22:02:32 arch kwin_wayland[1656]: The requested buffer size is too big, ignoring
ls -lR /sys/class/drm
glxinfo -B

and from your previous attempts you'll still have an xorg file (likely /var/log/Xorg.0.log), please post that as well.

There is the output of ls -lR /sys/class/drm
glxinfo -B

/sys/class/drm:
total 0
lrwxrwxrwx 1 root root    0 26 avril 09:11 card1 -> ../../devices/pci0000:00/0000:00:02.0/drm/card1
lrwxrwxrwx 1 root root    0 26 avril 09:11 card1-DP-1 -> ../../devices/pci0000:00/0000:00:02.0/drm/card1/card1-DP-1
lrwxrwxrwx 1 root root    0 26 avril 09:11 card1-DP-2 -> ../../devices/pci0000:00/0000:00:02.0/drm/card1/card1-DP-2
lrwxrwxrwx 1 root root    0 26 avril 09:11 card1-DP-3 -> ../../devices/pci0000:00/0000:00:02.0/drm/card1/card1-DP-3
lrwxrwxrwx 1 root root    0 26 avril 09:11 card1-DP-4 -> ../../devices/pci0000:00/0000:00:02.0/drm/card1/card1-DP-4
lrwxrwxrwx 1 root root    0 26 avril 09:11 card1-eDP-1 -> ../../devices/pci0000:00/0000:00:02.0/drm/card1/card1-eDP-1
lrwxrwxrwx 1 root root    0 26 avril 09:11 card1-HDMI-A-1 -> ../../devices/pci0000:00/0000:00:02.0/drm/card1/card1-HDMI-A-1
lrwxrwxrwx 1 root root    0 26 avril 09:11 renderD128 -> ../../devices/pci0000:00/0000:00:02.0/drm/renderD128
-r--r--r-- 1 root root 4096 26 avril 09:11 version
name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Intel (0x8086)
    Device: Mesa Intel(R) Graphics (ADL-N) (0x46d4)
    Version: 26.0.5
    Accelerated: yes
    Video memory: 7423MB
    Unified memory: yes
    Preferred profile: core (0x1)
    Max core profile version: 4.6
    Max compat profile version: 4.6
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) Graphics (ADL-N)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 26.0.5-arch1.1
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 26.0.5-arch1.1
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 26.0.5-arch1.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

And the content of /var/log/Xorg.0.log is here : https://paste.c-net.org/FiltersRendered

Offline

#8 2026-04-26 08:47:24

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,850

Re: HDMI external monitor limited to 1680x1050

This all looks rather unsuspicious, the render device is there, just not the /dev/dri/* symlink?
The HDMI output does not seem to have been attached during that X11 run, please reboot, check whether /dev/dri/renderD128 exists, start an X11 session (what's your DM btw? In case of SDDM: X11 or wayland backend?) and post
1. your new xorg log
2. the output of "xrandr --verbose"
3. 

for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done

You'll need https://archlinux.org/packages/extra/x86_64/v4l-utils/

1080@60p does not work?
I could see a poor cable downshifting to to 165Hz TMDS but that would still allow FullHD, https://en.wikipedia.org/wiki/HDMI#Refr … dard_video
1680x1050 at 59,88Hz is a rather weird cap…

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2026-04-26 09:45:17

loan34k
Member
Registered: 2026-04-18
Posts: 11

Re: HDMI external monitor limited to 1680x1050

seth wrote:

This all looks rather unsuspicious, the render device is there, just not the /dev/dri/* symlink?
The HDMI output does not seem to have been attached during that X11 run, please reboot, check whether /dev/dri/renderD128 exists, start an X11 session (what's your DM btw? In case of SDDM: X11 or wayland backend?) and post
1. your new xorg log
2. the output of "xrandr --verbose"
3. 

for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done

You'll need https://archlinux.org/packages/extra/x86_64/v4l-utils/

1080@60p does not work?
I could see a poor cable downshifting to to 165Hz TMDS but that would still allow FullHD, https://en.wikipedia.org/wiki/HDMI#Refr … dard_video
1680x1050 at 59,88Hz is a rather weird cap…


I'm using gdm

My new Xorg log : https://paste.c-net.org/AbsentNamed

The output of xrandr --verbose : https://paste.c-net.org/CuervoUpdate

the output of for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done : https://paste.c-net.org/SimonSleaze

Suddenly, when I was typing the commands (with the external monitor pluged but showing no signal and my screen and my laptop screen going black and then back to normal), the screen worked in 1440@59,95Hz. I tried 1080@120Hz but it showed no signal again. I retried to put on 1440@59.95 but it doesn't work anymore.

This can't be an HDMI cable issue because I can plug my PS5 to the same screen in 1440@120Hz (I don't know if that explains anything)

Offline

#10 2026-04-26 13:10:44

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,850

Re: HDMI external monitor limited to 1680x1050

[     7.385] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 19 06:18:29 2026

xorg log is old, GDM 50 actually cannot start X11 sessions and although the xrandr output actually doesn't suggest that, make sure you're not running some wayland session:

loginctl session-status
eDP-1 connected 1920x1200+2560+0 (0x48) normal (normal left inverted right x axis y axis) 263mm x 164mm
…
  2560x1440 (0x95) 241.500MHz +HSync -VSync *current +preferred
        h: width  2560 start 2608 end 2640 total 2720 skew    0 clock  88.79KHz
        v: height 1440 start 1443 end 1448 total 1481           clock  59.95Hz

This mode is preferred and current but I assume at the time you received no signal - can you move the pointer into the dead area (to the left)?

Cut out GDM, boot the multi-user.target and from there "startx" (you'll need to install xterm for the default xinitrc) and see whether you can xrandr-control the outputs from there.
If not, my last best guess would be https://wiki.archlinux.org/title/Intel_ … _Xe_driver

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2026-04-26 19:45:55

loan34k
Member
Registered: 2026-04-18
Posts: 11

Re: HDMI external monitor limited to 1680x1050

seth wrote:
[     7.385] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 19 06:18:29 2026

xorg log is old, GDM 50 actually cannot start X11 sessions and although the xrandr output actually doesn't suggest that, make sure you're not running some wayland session:

loginctl session-status
eDP-1 connected 1920x1200+2560+0 (0x48) normal (normal left inverted right x axis y axis) 263mm x 164mm
…
  2560x1440 (0x95) 241.500MHz +HSync -VSync *current +preferred
        h: width  2560 start 2608 end 2640 total 2720 skew    0 clock  88.79KHz
        v: height 1440 start 1443 end 1448 total 1481           clock  59.95Hz

This mode is preferred and current but I assume at the time you received no signal - can you move the pointer into the dead area (to the left)?

Cut out GDM, boot the multi-user.target and from there "startx" (you'll need to install xterm for the default xinitrc) and see whether you can xrandr-control the outputs from there.
If not, my last best guess would be https://wiki.archlinux.org/title/Intel_ … _Xe_driver

I started via startx and this is my new Xorg log :

[  2097.680] 
X.Org X Server 1.21.1.22
X Protocol Version 11, Revision 0
[  2097.682] Current Operating System: Linux arch 6.19.14-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Thu, 23 Apr 2026 06:56:44 +0000 x86_64
[  2097.682] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=e2cc51a9-6026-4d71-a3eb-bf976ef43683 rw root=UUID=e2cc51a9-6026-4d71-a3eb-bf976ef43683 rw
[  2097.684]  
[  2097.684] Current version of pixman: 0.46.4
[  2097.686] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2097.686] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2097.689] (==) Log file: "/home/loan/.local/share/xorg/Xorg.0.log", Time: Sun Apr 26 21:13:56 2026
[  2097.690] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2097.691] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2097.691] (==) No Layout section.  Using the first Screen section.
[  2097.691] (==) No screen section available. Using defaults.
[  2097.691] (**) |-->Screen "Default Screen Section" (0)
[  2097.691] (**) |   |-->Monitor "<default monitor>"
[  2097.691] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  2097.691] (**) |   |-->Device "Intel Graphics"
[  2097.691] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  2097.691] (**) Allowing byte-swapped clients
[  2097.691] (==) Automatically adding devices
[  2097.691] (==) Automatically enabling devices
[  2097.691] (==) Automatically adding GPU devices
[  2097.691] (==) Automatically binding GPU devices
[  2097.691] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2097.691] (WW) The directory "/usr/share/fonts/misc" does not exist.
[  2097.691] 	Entry deleted from font path.
[  2097.691] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  2097.691] 	Entry deleted from font path.
[  2097.691] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  2097.691] 	Entry deleted from font path.
[  2097.691] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[  2097.691] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2097.691] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2097.691] (II) Module ABI versions:
[  2097.691] 	X.Org ANSI C Emulation: 0.4
[  2097.691] 	X.Org Video Driver: 25.2
[  2097.691] 	X.Org XInput driver : 24.4
[  2097.691] 	X.Org Server Extension : 10.0
[  2097.691] (++) using VT number 2

[  2097.692] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_312
[  2097.694] (II) xfree86: Adding drm device (/dev/dri/card1)
[  2097.694] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[  2097.710] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[  2097.711] (--) PCI:*(0@0:2:0) 8086:46d4:17aa:3801 rev 0, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00002000/64, BIOS @ 0x????????/131072
[  2097.711] (II) LoadModule: "glx"
[  2097.711] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2097.712] (II) Module glx: vendor="X.Org Foundation"
[  2097.712] 	compiled for 1.21.1.22, module version = 1.0.0
[  2097.712] 	ABI class: X.Org Server Extension, version 10.0
[  2097.712] (II) LoadModule: "modesetting"
[  2097.712] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  2097.712] (II) Module modesetting: vendor="X.Org Foundation"
[  2097.712] 	compiled for 1.21.1.22, module version = 1.21.1
[  2097.712] 	Module class: X.Org Video Driver
[  2097.712] 	ABI class: X.Org Video Driver, version 25.2
[  2097.712] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2097.712] (II) modeset(0): using drv /dev/dri/card1
[  2097.712] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  2097.712] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  2097.712] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[  2097.712] (==) modeset(0): RGB weight 888
[  2097.712] (==) modeset(0): Default visual is TrueColor
[  2097.712] (II) Loading sub module "glamoregl"
[  2097.712] (II) LoadModule: "glamoregl"
[  2097.712] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  2097.714] (II) Module glamoregl: vendor="X.Org Foundation"
[  2097.714] 	compiled for 1.21.1.22, module version = 1.0.1
[  2097.714] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2097.747] (II) modeset(0): glamor: Using OpenGL 4.6 context.
[  2097.747] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL-N)
[  2097.747] (II) modeset(0): glamor initialized
[  2097.747] (==) modeset(0): VariableRefresh: disabled
[  2097.747] (==) modeset(0): AsyncFlipSecondaries: disabled
[  2097.748] (II) modeset(0): Output eDP-1 has no monitor section
[  2097.776] (II) modeset(0): Output HDMI-1 has no monitor section
[  2097.776] (II) modeset(0): Output DP-1 has no monitor section
[  2097.776] (II) modeset(0): Output DP-2 has no monitor section
[  2097.777] (II) modeset(0): Output DP-3 has no monitor section
[  2097.777] (II) modeset(0): Output DP-4 has no monitor section
[  2097.778] (II) modeset(0): EDID for output eDP-1
[  2097.778] (II) modeset(0): Manufacturer: BOE  Model: b34  Serial#: 0
[  2097.778] (II) modeset(0): Year: 2022  Week: 13
[  2097.778] (II) modeset(0): EDID Version: 1.4
[  2097.778] (II) modeset(0): Digital Display Input
[  2097.778] (II) modeset(0): 8 bits per channel
[  2097.778] (II) modeset(0): Digital interface is DisplayPort
[  2097.778] (II) modeset(0): Max Image Size [cm]: horiz.: 26  vert.: 16
[  2097.778] (II) modeset(0): Gamma: 2.20
[  2097.778] (II) modeset(0): No DPMS capabilities specified
[  2097.778] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[  2097.778] (II) modeset(0): First detailed timing is preferred mode
[  2097.778] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[  2097.778] (II) modeset(0): Display is continuous-frequency
[  2097.778] (II) modeset(0): redX: 0.597 redY: 0.364   greenX: 0.353 greenY: 0.604
[  2097.778] (II) modeset(0): blueX: 0.163 blueY: 0.116   whiteX: 0.313 whiteY: 0.329
[  2097.778] (II) modeset(0): Manufacturer's mask: 0
[  2097.778] (II) modeset(0): Supported detailed timing:
[  2097.778] (II) modeset(0): clock: 160.2 MHz   Image Size:  263 x 164 mm
[  2097.778] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2140 h_border: 0
[  2097.778] (II) modeset(0): v_active: 1200  v_sync: 1203  v_sync_end 1209 v_blanking: 1248 v_border: 0
[  2097.778] (II) modeset(0): Ranges: V min: 40 V max: 60 Hz, H min: 75 H max: 75 kHz, PixClock max 165 MHz
[  2097.778] (II) modeset(0):  BOE CQ
[  2097.778] (II) modeset(0):  NV122WUM-N41
[  2097.778] (II) modeset(0): Number of EDID sections to follow: 1
[  2097.778] (II) modeset(0): EDID (in hex):
[  2097.778] (II) modeset(0): 	00ffffffffffff0009e5340b00000000
[  2097.778] (II) modeset(0): 	0d200104a51a107803d6f5985d5a9a29
[  2097.778] (II) modeset(0): 	1d505400000001010101010101010101
[  2097.778] (II) modeset(0): 	010101010101993e80dc70b030403020
[  2097.778] (II) modeset(0): 	360007a41000001a000000fd00283c4b
[  2097.778] (II) modeset(0): 	4b10010a202020202020000000fe0042
[  2097.778] (II) modeset(0): 	4f452043510a202020202020000000fe
[  2097.778] (II) modeset(0): 	004e5631323257554d2d4e34310a0152
[  2097.778] (II) modeset(0): 	02030d00681a00000101283c00000000
[  2097.778] (II) modeset(0): 	00000000000000000000000000000000
[  2097.778] (II) modeset(0): 	00000000000000000000000000000000
[  2097.778] (II) modeset(0): 	00000000000000000000000000000000
[  2097.778] (II) modeset(0): 	00000000000000000000000000000000
[  2097.778] (II) modeset(0): 	00000000000000000000000000000000
[  2097.778] (II) modeset(0): 	00000000000000000000000000000000
[  2097.778] (II) modeset(0): 	00000000000000000000000000000006
[  2097.778] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[  2097.778] (II) modeset(0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[  2097.778] (II) modeset(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[  2097.778] (II) modeset(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[  2097.778] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[  2097.778] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[  2097.778] (II) modeset(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
[  2097.778] (II) modeset(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
[  2097.778] (II) modeset(0): Printing probed modes for output eDP-1
[  2097.778] (II) modeset(0): Modeline "1920x1200"x60.0  160.25  1920 1968 2000 2140  1200 1203 1209 1248 +hsync -vsync (74.9 kHz eP)
[  2097.778] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[  2097.778] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[  2097.778] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[  2097.778] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[  2097.778] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[  2097.778] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "1440x810"x60.0  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[  2097.778] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[  2097.778] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "1280x800"x60.0  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[  2097.778] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[  2097.778] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "1280x720"x60.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[  2097.778] (II) modeset(0): Modeline "1280x720"x60.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[  2097.778] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[  2097.778] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  2097.778] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[  2097.778] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[  2097.778] (II) modeset(0): Modeline "1024x576"x60.0   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[  2097.778] (II) modeset(0): Modeline "1024x576"x60.0   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[  2097.778] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[  2097.778] (II) modeset(0): Modeline "960x600"x59.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[  2097.778] (II) modeset(0): Modeline "960x600"x60.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "960x540"x60.0   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[  2097.778] (II) modeset(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[  2097.778] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[  2097.778] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  2097.778] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  2097.778] (II) modeset(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "840x525"x59.9   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[  2097.778] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[  2097.778] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  2097.778] (II) modeset(0): Modeline "800x450"x59.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "800x450"x59.8   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[  2097.778] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "700x450"x60.0   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "700x450"x59.9   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[  2097.778] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  2097.778] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  2097.778] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[  2097.778] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[  2097.778] (II) modeset(0): Modeline "684x384"x59.9   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[  2097.778] (II) modeset(0): Modeline "684x384"x59.9   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "640x400"x59.9   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[  2097.778] (II) modeset(0): Modeline "640x400"x60.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "640x360"x59.9   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[  2097.778] (II) modeset(0): Modeline "640x360"x59.8   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[  2097.778] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[  2097.778] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  2097.778] (II) modeset(0): Modeline "512x288"x60.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[  2097.778] (II) modeset(0): Modeline "512x288"x59.9   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[  2097.778] (II) modeset(0): Modeline "480x270"x59.6   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[  2097.778] (II) modeset(0): Modeline "480x270"x59.8   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  2097.778] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  2097.778] (II) modeset(0): Modeline "432x243"x59.9   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[  2097.778] (II) modeset(0): Modeline "432x243"x59.6   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[  2097.778] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  2097.778] (II) modeset(0): Modeline "360x202"x59.5   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[  2097.778] (II) modeset(0): Modeline "360x202"x59.1   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[  2097.778] (II) modeset(0): Modeline "320x180"x59.8    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[  2097.778] (II) modeset(0): Modeline "320x180"x59.3    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[  2097.806] (II) modeset(0): EDID for output HDMI-1
[  2097.806] (II) modeset(0): Manufacturer: AUS  Model: 272b  Serial#: 1
[  2097.806] (II) modeset(0): Year: 2023  Week: 51
[  2097.806] (II) modeset(0): EDID Version: 1.3
[  2097.806] (II) modeset(0): Digital Display Input
[  2097.806] (II) modeset(0): Max Image Size [cm]: horiz.: 60  vert.: 34
[  2097.806] (II) modeset(0): Gamma: 2.20
[  2097.806] (II) modeset(0): DPMS capabilities: Off
[  2097.806] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  2097.806] (II) modeset(0): Default color space is primary color space
[  2097.806] (II) modeset(0): First detailed timing is preferred mode
[  2097.806] (II) modeset(0): redX: 0.682 redY: 0.306   greenX: 0.273 greenY: 0.632
[  2097.806] (II) modeset(0): blueX: 0.148 blueY: 0.056   whiteX: 0.313 whiteY: 0.329
[  2097.806] (II) modeset(0): Supported established timings:
[  2097.806] (II) modeset(0): 720x400@70Hz
[  2097.806] (II) modeset(0): 640x480@60Hz
[  2097.806] (II) modeset(0): 640x480@75Hz
[  2097.806] (II) modeset(0): 800x600@60Hz
[  2097.806] (II) modeset(0): 800x600@72Hz
[  2097.806] (II) modeset(0): 800x600@75Hz
[  2097.806] (II) modeset(0): 1024x768@60Hz
[  2097.806] (II) modeset(0): 1024x768@75Hz
[  2097.806] (II) modeset(0): 1280x1024@75Hz
[  2097.806] (II) modeset(0): Manufacturer's mask: 0
[  2097.806] (II) modeset(0): Supported standard timings:
[  2097.806] (II) modeset(0): #0: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[  2097.806] (II) modeset(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  2097.806] (II) modeset(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[  2097.806] (II) modeset(0): #3: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[  2097.806] (II) modeset(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[  2097.806] (II) modeset(0): #5: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[  2097.806] (II) modeset(0): Supported detailed timing:
[  2097.806] (II) modeset(0): clock: 241.5 MHz   Image Size:  597 x 336 mm
[  2097.806] (II) modeset(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[  2097.806] (II) modeset(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1481 v_border: 0
[  2097.806] (II) modeset(0): Ranges: V min: 48 V max: 144 Hz, H min: 30 H max: 216 kHz, PixClock max 605 MHz
[  2097.806] (II) modeset(0): Serial No: RCLMDW007893
[  2097.806] (II) modeset(0): Monitor name: VG27WQ
[  2097.806] (II) modeset(0): Supported detailed timing:
[  2097.806] (II) modeset(0): clock: 575.0 MHz   Image Size:  597 x 336 mm
[  2097.806] (II) modeset(0): h_active: 2560  h_sync: 2576  h_sync_end 2640 h_blank_end 2680 h_border: 0
[  2097.806] (II) modeset(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1490 v_border: 0
[  2097.806] (II) modeset(0): Supported detailed timing:
[  2097.806] (II) modeset(0): clock: 497.8 MHz   Image Size:  597 x 336 mm
[  2097.806] (II) modeset(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[  2097.806] (II) modeset(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1525 v_border: 0
[  2097.806] (II) modeset(0): Number of EDID sections to follow: 1
[  2097.806] (II) modeset(0): EDID (in hex):
[  2097.806] (II) modeset(0): 	00ffffffffffff0006b32b2701000000
[  2097.806] (II) modeset(0): 	33210103803c22782e9315ae4e46a126
[  2097.806] (II) modeset(0): 	0e5054a5cb0081c081809500a9c0b300
[  2097.806] (II) modeset(0): 	d1c001010101565e00a0a0a029503020
[  2097.806] (II) modeset(0): 	350055502100001a000000fd0030901e
[  2097.806] (II) modeset(0): 	d83c000a202020202020000000ff0052
[  2097.806] (II) modeset(0): 	434c4d44573030373839330a000000fc
[  2097.806] (II) modeset(0): 	005647323757510a2020202020200116
[  2097.806] (II) modeset(0): 	020349f34b01403f041091131f5d6061
[  2097.806] (II) modeset(0): 	230907078301000068030c002000382d
[  2097.806] (II) modeset(0): 	0067d85dc4017880036d1a0000020130
[  2097.806] (II) modeset(0): 	90ed0000000000e305e301e30f0006e6
[  2097.806] (II) modeset(0): 	060701665928e2006a9ee00078a0a032
[  2097.806] (II) modeset(0): 	501040350055502100001a6fc200a0a0
[  2097.806] (II) modeset(0): 	a055503020350055502100001a5aa000
[  2097.806] (II) modeset(0): 	a0a0a046503020350055502100001aba
[  2097.806] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[  2097.806] (II) modeset(0): Printing probed modes for output HDMI-1
[  2097.806] (II) modeset(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[  2097.806] (II) modeset(0): Modeline "3840x2160"x60.0  594.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (135.0 kHz e)
[  2097.806] (II) modeset(0): Modeline "3840x2160"x50.0  594.00  3840 4896 4984 5280  2160 2168 2178 2250 +hsync +vsync (112.5 kHz e)
[  2097.806] (II) modeset(0): Modeline "3840x2160"x59.9  593.41  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (134.9 kHz e)
[  2097.806] (II) modeset(0): Modeline "3840x2160"x24.0  297.00  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[  2097.806] (II) modeset(0): Modeline "3840x2160"x24.0  296.70  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[  2097.806] (II) modeset(0): Modeline "1920x1080"x120.0  297.00  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (135.0 kHz e)
[  2097.806] (II) modeset(0): Modeline "1920x1080"x100.0  297.00  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (112.5 kHz e)
[  2097.806] (II) modeset(0): Modeline "1920x1080"x119.9  296.70  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (134.9 kHz e)
[  2097.806] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[  2097.806] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[  2097.806] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  2097.806] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[  2097.806] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[  2097.806] (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[  2097.806] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  2097.806] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  2097.806] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[  2097.806] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  2097.806] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[  2097.806] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  2097.806] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  2097.806] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  2097.806] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  2097.806] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  2097.806] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  2097.806] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[  2097.806] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  2097.806] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  2097.806] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  2097.806] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  2097.806] (II) modeset(0): EDID for output DP-1
[  2097.806] (II) modeset(0): EDID for output DP-2
[  2097.806] (II) modeset(0): EDID for output DP-3
[  2097.806] (II) modeset(0): EDID for output DP-4
[  2097.806] (II) modeset(0): Output eDP-1 connected
[  2097.806] (II) modeset(0): Output HDMI-1 connected
[  2097.806] (II) modeset(0): Output DP-1 disconnected
[  2097.806] (II) modeset(0): Output DP-2 disconnected
[  2097.806] (II) modeset(0): Output DP-3 disconnected
[  2097.806] (II) modeset(0): Output DP-4 disconnected
[  2097.806] (II) modeset(0): Using spanning desktop for initial modes
[  2097.806] (II) modeset(0): Output eDP-1 using initial mode 1920x1200 +0+0
[  2097.806] (II) modeset(0): Output HDMI-1 using initial mode 2560x1440 +1920+0
[  2097.806] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[  2097.806] (==) modeset(0): DPI set to (96, 96)
[  2097.806] (II) Loading sub module "fb"
[  2097.806] (II) LoadModule: "fb"
[  2097.806] (II) Module "fb" already built-in
[  2097.822] (==) modeset(0): Backing store enabled
[  2097.822] (==) modeset(0): Silken mouse enabled
[  2097.963] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[  2097.963] (==) modeset(0): DPMS enabled
[  2097.963] (II) modeset(0): [DRI2] Setup complete
[  2097.963] (II) modeset(0): [DRI2]   DRI driver: iris
[  2097.963] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[  2097.963] (II) Initializing extension Generic Event Extension
[  2097.963] (II) Initializing extension SHAPE
[  2097.964] (II) Initializing extension MIT-SHM
[  2097.964] (II) Initializing extension XInputExtension
[  2097.964] (II) Initializing extension XTEST
[  2097.964] (II) Initializing extension BIG-REQUESTS
[  2097.964] (II) Initializing extension SYNC
[  2097.964] (II) Initializing extension XKEYBOARD
[  2097.964] (II) Initializing extension XC-MISC
[  2097.964] (II) Initializing extension SECURITY
[  2097.964] (II) Initializing extension XFIXES
[  2097.964] (II) Initializing extension RENDER
[  2097.964] (II) Initializing extension RANDR
[  2097.964] (II) Initializing extension COMPOSITE
[  2097.964] (II) Initializing extension DAMAGE
[  2097.964] (II) Initializing extension MIT-SCREEN-SAVER
[  2097.965] (II) Initializing extension DOUBLE-BUFFER
[  2097.965] (II) Initializing extension RECORD
[  2097.965] (II) Initializing extension DPMS
[  2097.965] (II) Initializing extension Present
[  2097.965] (II) Initializing extension DRI3
[  2097.965] (II) Initializing extension X-Resource
[  2097.965] (II) Initializing extension XVideo
[  2097.965] (II) Initializing extension XVideo-MotionCompensation
[  2097.965] (II) Initializing extension GLX
[  2097.971] (II) AIGLX: Loaded and initialized iris
[  2097.971] (II) GLX: Initialized DRI2 GL provider for screen 0
[  2097.971] (II) Initializing extension XFree86-VidModeExtension
[  2097.971] (II) Initializing extension XFree86-DGA
[  2097.971] (II) Initializing extension XFree86-DRI
[  2097.971] (II) Initializing extension DRI2
[  2097.972] (II) modeset(0): Damage tracking initialized
[  2097.972] (II) modeset(0): Setting screen physical size to 1185 x 381
[  2098.044] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  2098.044] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2098.044] (**) Power Button: Applying InputClass "system-keyboard"
[  2098.044] (II) LoadModule: "libinput"
[  2098.044] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  2098.046] (II) Module libinput: vendor="X.Org Foundation"
[  2098.046] 	compiled for 1.21.1.13, module version = 1.5.0
[  2098.046] 	Module class: X.Org XInput Driver
[  2098.046] 	ABI class: X.Org XInput driver, version 24.4
[  2098.046] (II) Using input driver 'libinput' for 'Power Button'
[  2098.047] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
[  2098.047] (**) Power Button: always reports core events
[  2098.047] (**) Option "Device" "/dev/input/event1"
[  2098.048] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  2098.049] (II) event1  - Power Button: device is a keyboard
[  2098.049] (II) event1  - Power Button: device removed
[  2098.049] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[  2098.049] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2098.049] (**) Option "xkb_layout" "fr"
[  2098.063] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  2098.063] (II) event1  - Power Button: device is a keyboard
[  2098.063] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[  2098.063] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  2098.063] (**) Video Bus: Applying InputClass "system-keyboard"
[  2098.063] (II) Using input driver 'libinput' for 'Video Bus'
[  2098.064] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 28 paused 0
[  2098.064] (**) Video Bus: always reports core events
[  2098.064] (**) Option "Device" "/dev/input/event10"
[  2098.065] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[  2098.065] (II) event10 - Video Bus: device is a keyboard
[  2098.065] (II) event10 - Video Bus: device removed
[  2098.065] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input23/event10"
[  2098.065] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  2098.065] (**) Option "xkb_layout" "fr"
[  2098.066] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[  2098.066] (II) event10 - Video Bus: device is a keyboard
[  2098.067] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  2098.067] (II) No input driver specified, ignoring this device.
[  2098.067] (II) This device may have been added with another device file.
[  2098.068] (II) config/udev: Adding input device HP, Inc HyperX Cloud III Consumer Control (/dev/input/event3)
[  2098.068] (**) HP, Inc HyperX Cloud III Consumer Control: Applying InputClass "libinput keyboard catchall"
[  2098.068] (**) HP, Inc HyperX Cloud III Consumer Control: Applying InputClass "system-keyboard"
[  2098.068] (II) Using input driver 'libinput' for 'HP, Inc HyperX Cloud III Consumer Control'
[  2098.068] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 29 paused 0
[  2098.068] (**) HP, Inc HyperX Cloud III Consumer Control: always reports core events
[  2098.068] (**) Option "Device" "/dev/input/event3"
[  2098.070] (II) event3  - HP, Inc HyperX Cloud III Consumer Control: is tagged by udev as: Keyboard
[  2098.070] (II) event3  - HP, Inc HyperX Cloud III Consumer Control: device is a keyboard
[  2098.070] (II) event3  - HP, Inc HyperX Cloud III Consumer Control: device removed
[  2098.070] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.3/0003:03F0:089D.0001/input/input3/event3"
[  2098.070] (II) XINPUT: Adding extended input device "HP, Inc HyperX Cloud III Consumer Control" (type: KEYBOARD, id 8)
[  2098.070] (**) Option "xkb_layout" "fr"
[  2098.071] (II) event3  - HP, Inc HyperX Cloud III Consumer Control: is tagged by udev as: Keyboard
[  2098.071] (II) event3  - HP, Inc HyperX Cloud III Consumer Control: device is a keyboard
[  2098.072] (II) config/udev: Adding input device HP, Inc HyperX Cloud III (/dev/input/event4)
[  2098.072] (II) No input driver specified, ignoring this device.
[  2098.072] (II) This device may have been added with another device file.
[  2098.073] (II) config/udev: Adding input device HP, Inc HyperX Cloud III (/dev/input/event5)
[  2098.073] (II) No input driver specified, ignoring this device.
[  2098.073] (II) This device may have been added with another device file.
[  2098.074] (II) config/udev: Adding input device Generic CS202 (/dev/input/event24)
[  2098.074] (**) Generic CS202: Applying InputClass "libinput keyboard catchall"
[  2098.074] (**) Generic CS202: Applying InputClass "system-keyboard"
[  2098.074] (II) Using input driver 'libinput' for 'Generic CS202'
[  2098.074] (II) systemd-logind: got fd for /dev/input/event24 13:88 fd 30 paused 0
[  2098.074] (**) Generic CS202: always reports core events
[  2098.074] (**) Option "Device" "/dev/input/event24"
[  2098.076] (II) event24 - Generic CS202: is tagged by udev as: Keyboard
[  2098.076] (II) event24 - Generic CS202: device is a keyboard
[  2098.076] (II) event24 - Generic CS202: device removed
[  2098.076] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1.3/3-2.1.3:1.3/0003:001F:0B21.0007/input/input34/event24"
[  2098.076] (II) XINPUT: Adding extended input device "Generic CS202" (type: KEYBOARD, id 9)
[  2098.076] (**) Option "xkb_layout" "fr"
[  2098.078] (II) event24 - Generic CS202: is tagged by udev as: Keyboard
[  2098.078] (II) event24 - Generic CS202: device is a keyboard
[  2098.079] (II) config/udev: Adding input device Evision AK820 (/dev/input/event20)
[  2098.079] (**) Evision AK820: Applying InputClass "libinput keyboard catchall"
[  2098.079] (**) Evision AK820: Applying InputClass "system-keyboard"
[  2098.079] (II) Using input driver 'libinput' for 'Evision AK820'
[  2098.079] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 31 paused 0
[  2098.079] (**) Evision AK820: always reports core events
[  2098.079] (**) Option "Device" "/dev/input/event20"
[  2098.081] (II) event20 - Evision AK820: is tagged by udev as: Keyboard
[  2098.081] (II) event20 - Evision AK820: device is a keyboard
[  2098.081] (II) event20 - Evision AK820: device removed
[  2098.081] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.0/0003:320F:505B.0005/input/input30/event20"
[  2098.081] (II) XINPUT: Adding extended input device "Evision AK820" (type: KEYBOARD, id 10)
[  2098.081] (**) Option "xkb_layout" "fr"
[  2098.082] (II) event20 - Evision AK820: is tagged by udev as: Keyboard
[  2098.082] (II) event20 - Evision AK820: device is a keyboard
[  2098.083] (II) config/udev: Adding input device Evision AK820 Keyboard (/dev/input/event21)
[  2098.083] (**) Evision AK820 Keyboard: Applying InputClass "libinput keyboard catchall"
[  2098.083] (**) Evision AK820 Keyboard: Applying InputClass "system-keyboard"
[  2098.083] (II) Using input driver 'libinput' for 'Evision AK820 Keyboard'
[  2098.084] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 32 paused 0
[  2098.084] (**) Evision AK820 Keyboard: always reports core events
[  2098.084] (**) Option "Device" "/dev/input/event21"
[  2098.085] (II) event21 - Evision AK820 Keyboard: is tagged by udev as: Keyboard
[  2098.086] (II) event21 - Evision AK820 Keyboard: device is a keyboard
[  2098.086] (II) event21 - Evision AK820 Keyboard: device removed
[  2098.086] (II) libinput: Evision AK820 Keyboard: needs a virtual subdevice
[  2098.086] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.1/0003:320F:505B.0006/input/input31/event21"
[  2098.086] (II) XINPUT: Adding extended input device "Evision AK820 Keyboard" (type: MOUSE, id 11)
[  2098.086] (**) Option "AccelerationScheme" "none"
[  2098.086] (**) Evision AK820 Keyboard: (accel) selected scheme none/0
[  2098.086] (**) Evision AK820 Keyboard: (accel) acceleration factor: 2.000
[  2098.086] (**) Evision AK820 Keyboard: (accel) acceleration threshold: 4
[  2098.087] (II) event21 - Evision AK820 Keyboard: is tagged by udev as: Keyboard
[  2098.087] (II) event21 - Evision AK820 Keyboard: device is a keyboard
[  2098.088] (II) config/udev: Adding input device Evision AK820 (/dev/input/event22)
[  2098.088] (II) No input driver specified, ignoring this device.
[  2098.088] (II) This device may have been added with another device file.
[  2098.089] (II) config/udev: Adding input device Evision AK820 Mouse (/dev/input/event23)
[  2098.089] (**) Evision AK820 Mouse: Applying InputClass "libinput pointer catchall"
[  2098.089] (II) Using input driver 'libinput' for 'Evision AK820 Mouse'
[  2098.090] (II) systemd-logind: got fd for /dev/input/event23 13:87 fd 33 paused 0
[  2098.090] (**) Evision AK820 Mouse: always reports core events
[  2098.090] (**) Option "Device" "/dev/input/event23"
[  2098.091] (II) event23 - Evision AK820 Mouse: is tagged by udev as: Mouse
[  2098.091] (II) event23 - Evision AK820 Mouse: device is a pointer
[  2098.092] (II) event23 - Evision AK820 Mouse: device removed
[  2098.092] (II) libinput: Evision AK820 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.092] (II) libinput: Evision AK820 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.092] (II) libinput: Evision AK820 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.092] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.1/0003:320F:505B.0006/input/input33/event23"
[  2098.092] (II) XINPUT: Adding extended input device "Evision AK820 Mouse" (type: MOUSE, id 12)
[  2098.092] (**) Option "AccelerationScheme" "none"
[  2098.092] (**) Evision AK820 Mouse: (accel) selected scheme none/0
[  2098.092] (**) Evision AK820 Mouse: (accel) acceleration factor: 2.000
[  2098.092] (**) Evision AK820 Mouse: (accel) acceleration threshold: 4
[  2098.093] (II) event23 - Evision AK820 Mouse: is tagged by udev as: Mouse
[  2098.093] (II) event23 - Evision AK820 Mouse: device is a pointer
[  2098.094] (II) config/udev: Adding input device Evision AK820 Mouse (/dev/input/mouse4)
[  2098.094] (II) No input driver specified, ignoring this device.
[  2098.094] (II) This device may have been added with another device file.
[  2098.095] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/event25)
[  2098.095] (**) E-Signal USB Gaming Mouse: Applying InputClass "libinput pointer catchall"
[  2098.095] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse'
[  2098.146] (II) systemd-logind: got fd for /dev/input/event25 13:89 fd 34 paused 0
[  2098.146] (**) E-Signal USB Gaming Mouse: always reports core events
[  2098.146] (**) Option "Device" "/dev/input/event25"
[  2098.148] (II) event25 - E-Signal USB Gaming Mouse: is tagged by udev as: Mouse
[  2098.148] (II) event25 - E-Signal USB Gaming Mouse: device is a pointer
[  2098.148] (II) event25 - E-Signal USB Gaming Mouse: device removed
[  2098.148] (II) libinput: E-Signal USB Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.148] (II) libinput: E-Signal USB Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.148] (II) libinput: E-Signal USB Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.148] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.0/0003:04D9:A09F.0008/input/input35/event25"
[  2098.148] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse" (type: MOUSE, id 13)
[  2098.148] (**) Option "AccelerationScheme" "none"
[  2098.148] (**) E-Signal USB Gaming Mouse: (accel) selected scheme none/0
[  2098.148] (**) E-Signal USB Gaming Mouse: (accel) acceleration factor: 2.000
[  2098.148] (**) E-Signal USB Gaming Mouse: (accel) acceleration threshold: 4
[  2098.149] (II) event25 - E-Signal USB Gaming Mouse: is tagged by udev as: Mouse
[  2098.149] (II) event25 - E-Signal USB Gaming Mouse: device is a pointer
[  2098.150] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/mouse5)
[  2098.150] (II) No input driver specified, ignoring this device.
[  2098.150] (II) This device may have been added with another device file.
[  2098.151] (II) config/udev: Adding input device E-Signal USB Gaming Mouse Keyboard (/dev/input/event26)
[  2098.151] (**) E-Signal USB Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[  2098.151] (**) E-Signal USB Gaming Mouse Keyboard: Applying InputClass "system-keyboard"
[  2098.151] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse Keyboard'
[  2098.152] (II) systemd-logind: got fd for /dev/input/event26 13:90 fd 35 paused 0
[  2098.152] (**) E-Signal USB Gaming Mouse Keyboard: always reports core events
[  2098.152] (**) Option "Device" "/dev/input/event26"
[  2098.153] (II) event26 - E-Signal USB Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[  2098.154] (II) event26 - E-Signal USB Gaming Mouse Keyboard: device is a keyboard
[  2098.154] (II) event26 - E-Signal USB Gaming Mouse Keyboard: device removed
[  2098.154] (II) libinput: E-Signal USB Gaming Mouse Keyboard: needs a virtual subdevice
[  2098.154] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.1/0003:04D9:A09F.0009/input/input36/event26"
[  2098.154] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse Keyboard" (type: MOUSE, id 14)
[  2098.154] (**) Option "AccelerationScheme" "none"
[  2098.154] (**) E-Signal USB Gaming Mouse Keyboard: (accel) selected scheme none/0
[  2098.154] (**) E-Signal USB Gaming Mouse Keyboard: (accel) acceleration factor: 2.000
[  2098.154] (**) E-Signal USB Gaming Mouse Keyboard: (accel) acceleration threshold: 4
[  2098.155] (II) event26 - E-Signal USB Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[  2098.155] (II) event26 - E-Signal USB Gaming Mouse Keyboard: device is a keyboard
[  2098.156] (II) config/udev: Adding input device E-Signal USB Gaming Mouse (/dev/input/event27)
[  2098.156] (II) No input driver specified, ignoring this device.
[  2098.156] (II) This device may have been added with another device file.
[  2098.157] (II) config/udev: Adding input device Wacom HID 535C Pen (/dev/input/event8)
[  2098.157] (**) Wacom HID 535C Pen: Applying InputClass "libinput tablet catchall"
[  2098.157] (II) Using input driver 'libinput' for 'Wacom HID 535C Pen'
[  2098.157] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 36 paused 0
[  2098.157] (**) Wacom HID 535C Pen: always reports core events
[  2098.157] (**) Option "Device" "/dev/input/event8"
[  2098.159] (II) event8  - Wacom HID 535C Pen: is tagged by udev as: Tablet
[  2098.198] (II) event8  - Wacom HID 535C Pen: device "Wacom HID 535C Pen" (056a:535c) is not known to libwacom
[  2098.198] (II) event8  - Wacom HID 535C Pen: device is a tablet
[  2098.198] (II) event8  - Wacom HID 535C Pen: device removed
[  2098.198] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-WACF2200:00/0018:056A:535C.0003/input/input20/event8"
[  2098.198] (II) XINPUT: Adding extended input device "Wacom HID 535C Pen" (type: TABLET, id 15)
[  2098.199] (II) event8  - Wacom HID 535C Pen: is tagged by udev as: Tablet
[  2098.224] (II) event8  - Wacom HID 535C Pen: device "Wacom HID 535C Pen" (056a:535c) is not known to libwacom
[  2098.224] (II) event8  - Wacom HID 535C Pen: device is a tablet
[  2098.224] (II) config/udev: Adding input device Wacom HID 535C Pen (/dev/input/mouse2)
[  2098.224] (II) No input driver specified, ignoring this device.
[  2098.224] (II) This device may have been added with another device file.
[  2098.225] (II) config/udev: Adding input device Wacom HID 535C Finger (/dev/input/event9)
[  2098.225] (**) Wacom HID 535C Finger: Applying InputClass "libinput touchscreen catchall"
[  2098.225] (II) Using input driver 'libinput' for 'Wacom HID 535C Finger'
[  2098.226] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 38 paused 0
[  2098.226] (**) Wacom HID 535C Finger: always reports core events
[  2098.226] (**) Option "Device" "/dev/input/event9"
[  2098.227] (II) event9  - Wacom HID 535C Finger: is tagged by udev as: Touchscreen
[  2098.227] (II) event9  - Wacom HID 535C Finger: device is a touch device
[  2098.227] (II) event9  - Wacom HID 535C Finger: device removed
[  2098.227] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-WACF2200:00/0018:056A:535C.0003/input/input21/event9"
[  2098.227] (II) XINPUT: Adding extended input device "Wacom HID 535C Finger" (type: TOUCHSCREEN, id 16)
[  2098.227] (**) Option "AccelerationScheme" "none"
[  2098.227] (**) Wacom HID 535C Finger: (accel) selected scheme none/0
[  2098.227] (**) Wacom HID 535C Finger: (accel) acceleration factor: 2.000
[  2098.227] (**) Wacom HID 535C Finger: (accel) acceleration threshold: 4
[  2098.228] (II) event9  - Wacom HID 535C Finger: is tagged by udev as: Touchscreen
[  2098.228] (II) event9  - Wacom HID 535C Finger: device is a touch device
[  2098.229] (II) config/udev: Adding input device Wacom HID 535C Finger (/dev/input/mouse3)
[  2098.229] (II) No input driver specified, ignoring this device.
[  2098.229] (II) This device may have been added with another device file.
[  2098.229] (II) config/udev: Adding input device ELAN0647:01 04F3:31B2 Mouse (/dev/input/event6)
[  2098.229] (**) ELAN0647:01 04F3:31B2 Mouse: Applying InputClass "libinput pointer catchall"
[  2098.229] (II) Using input driver 'libinput' for 'ELAN0647:01 04F3:31B2 Mouse'
[  2098.245] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 39 paused 0
[  2098.245] (**) ELAN0647:01 04F3:31B2 Mouse: always reports core events
[  2098.245] (**) Option "Device" "/dev/input/event6"
[  2098.247] (II) event6  - ELAN0647:01 04F3:31B2 Mouse: is tagged by udev as: Mouse
[  2098.247] (II) event6  - ELAN0647:01 04F3:31B2 Mouse: device is a pointer
[  2098.247] (II) event6  - ELAN0647:01 04F3:31B2 Mouse: device removed
[  2098.247] (II) libinput: ELAN0647:01 04F3:31B2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.247] (II) libinput: ELAN0647:01 04F3:31B2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.247] (II) libinput: ELAN0647:01 04F3:31B2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.247] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0647:01/0018:04F3:31B2.0002/input/input17/event6"
[  2098.247] (II) XINPUT: Adding extended input device "ELAN0647:01 04F3:31B2 Mouse" (type: MOUSE, id 17)
[  2098.247] (**) Option "AccelerationScheme" "none"
[  2098.247] (**) ELAN0647:01 04F3:31B2 Mouse: (accel) selected scheme none/0
[  2098.247] (**) ELAN0647:01 04F3:31B2 Mouse: (accel) acceleration factor: 2.000
[  2098.247] (**) ELAN0647:01 04F3:31B2 Mouse: (accel) acceleration threshold: 4
[  2098.248] (II) event6  - ELAN0647:01 04F3:31B2 Mouse: is tagged by udev as: Mouse
[  2098.248] (II) event6  - ELAN0647:01 04F3:31B2 Mouse: device is a pointer
[  2098.249] (II) config/udev: Adding input device ELAN0647:01 04F3:31B2 Mouse (/dev/input/mouse0)
[  2098.249] (II) No input driver specified, ignoring this device.
[  2098.249] (II) This device may have been added with another device file.
[  2098.250] (II) config/udev: Adding input device ELAN0647:01 04F3:31B2 Touchpad (/dev/input/event7)
[  2098.250] (**) ELAN0647:01 04F3:31B2 Touchpad: Applying InputClass "libinput touchpad catchall"
[  2098.250] (II) Using input driver 'libinput' for 'ELAN0647:01 04F3:31B2 Touchpad'
[  2098.250] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 40 paused 0
[  2098.250] (**) ELAN0647:01 04F3:31B2 Touchpad: always reports core events
[  2098.250] (**) Option "Device" "/dev/input/event7"
[  2098.252] (II) event7  - ELAN0647:01 04F3:31B2 Touchpad: is tagged by udev as: Touchpad
[  2098.253] (II) event7  - ELAN0647:01 04F3:31B2 Touchpad: device is a touchpad
[  2098.253] (II) event7  - ELAN0647:01 04F3:31B2 Touchpad: device removed
[  2098.253] (II) libinput: ELAN0647:01 04F3:31B2 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.253] (II) libinput: ELAN0647:01 04F3:31B2 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.253] (II) libinput: ELAN0647:01 04F3:31B2 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2098.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0647:01/0018:04F3:31B2.0002/input/input19/event7"
[  2098.253] (II) XINPUT: Adding extended input device "ELAN0647:01 04F3:31B2 Touchpad" (type: TOUCHPAD, id 18)
[  2098.254] (**) Option "AccelerationScheme" "none"
[  2098.254] (**) ELAN0647:01 04F3:31B2 Touchpad: (accel) selected scheme none/0
[  2098.254] (**) ELAN0647:01 04F3:31B2 Touchpad: (accel) acceleration factor: 2.000
[  2098.254] (**) ELAN0647:01 04F3:31B2 Touchpad: (accel) acceleration threshold: 4
[  2098.255] (II) event7  - ELAN0647:01 04F3:31B2 Touchpad: is tagged by udev as: Touchpad
[  2098.256] (II) event7  - ELAN0647:01 04F3:31B2 Touchpad: device is a touchpad
[  2098.257] (II) config/udev: Adding input device ELAN0647:01 04F3:31B2 Touchpad (/dev/input/mouse1)
[  2098.257] (II) No input driver specified, ignoring this device.
[  2098.257] (II) This device may have been added with another device file.
[  2098.258] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event14)
[  2098.258] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[  2098.258] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[  2098.258] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[  2098.258] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 41 paused 0
[  2098.258] (**) Ideapad extra buttons: always reports core events
[  2098.258] (**) Option "Device" "/dev/input/event14"
[  2098.259] (II) event14 - Ideapad extra buttons: is tagged by udev as: Keyboard
[  2098.259] (II) event14 - Ideapad extra buttons: device is a keyboard
[  2098.260] (II) event14 - Ideapad extra buttons: device removed
[  2098.260] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input15/event14"
[  2098.260] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 19)
[  2098.260] (**) Option "xkb_layout" "fr"
[  2098.260] (II) event14 - Ideapad extra buttons: is tagged by udev as: Keyboard
[  2098.260] (II) event14 - Ideapad extra buttons: device is a keyboard
[  2098.261] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[  2098.261] (II) No input driver specified, ignoring this device.
[  2098.261] (II) This device may have been added with another device file.
[  2098.261] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[  2098.261] (II) No input driver specified, ignoring this device.
[  2098.261] (II) This device may have been added with another device file.
[  2098.262] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[  2098.262] (II) No input driver specified, ignoring this device.
[  2098.262] (II) This device may have been added with another device file.
[  2098.262] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[  2098.262] (II) No input driver specified, ignoring this device.
[  2098.262] (II) This device may have been added with another device file.
[  2098.262] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[  2098.262] (II) No input driver specified, ignoring this device.
[  2098.262] (II) This device may have been added with another device file.
[  2098.263] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[  2098.263] (II) No input driver specified, ignoring this device.
[  2098.263] (II) This device may have been added with another device file.
[  2098.263] (II) config/udev: Adding input device Lenovo Yoga Tablet Mode Control switch (/dev/input/event15)
[  2098.263] (II) No input driver specified, ignoring this device.
[  2098.263] (II) This device may have been added with another device file.
[  2098.264] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[  2098.264] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  2098.264] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[  2098.264] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  2098.264] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 42 paused 0
[  2098.264] (**) AT Translated Set 2 keyboard: always reports core events
[  2098.264] (**) Option "Device" "/dev/input/event2"
[  2098.265] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  2098.265] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[  2098.266] (II) event2  - AT Translated Set 2 keyboard: device removed
[  2098.266] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[  2098.266] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 20)
[  2098.266] (**) Option "xkb_layout" "fr"
[  2098.267] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  2098.267] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[  2098.269] (II) config/udev: Adding input device PC Speaker (/dev/input/event13)
[  2098.269] (II) No input driver specified, ignoring this device.
[  2098.269] (II) This device may have been added with another device file.
[  2098.276] (**) Evision AK820 Keyboard: Applying InputClass "libinput keyboard catchall"
[  2098.276] (**) Evision AK820 Keyboard: Applying InputClass "system-keyboard"
[  2098.276] (II) Using input driver 'libinput' for 'Evision AK820 Keyboard'
[  2098.276] (II) systemd-logind: returning pre-existing fd for /dev/input/event21 13:85
[  2098.276] (**) Evision AK820 Keyboard: always reports core events
[  2098.276] (**) Option "Device" "/dev/input/event21"
[  2098.276] (II) libinput: Evision AK820 Keyboard: is a virtual subdevice
[  2098.276] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.1/0003:320F:505B.0006/input/input31/event21"
[  2098.276] (II) XINPUT: Adding extended input device "Evision AK820 Keyboard" (type: KEYBOARD, id 21)
[  2098.276] (**) Option "xkb_layout" "fr"
[  2098.276] (**) E-Signal USB Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[  2098.276] (**) E-Signal USB Gaming Mouse Keyboard: Applying InputClass "system-keyboard"
[  2098.276] (II) Using input driver 'libinput' for 'E-Signal USB Gaming Mouse Keyboard'
[  2098.276] (II) systemd-logind: returning pre-existing fd for /dev/input/event26 13:90
[  2098.276] (**) E-Signal USB Gaming Mouse Keyboard: always reports core events
[  2098.276] (**) Option "Device" "/dev/input/event26"
[  2098.276] (II) libinput: E-Signal USB Gaming Mouse Keyboard: is a virtual subdevice
[  2098.276] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.1/0003:04D9:A09F.0009/input/input36/event26"
[  2098.276] (II) XINPUT: Adding extended input device "E-Signal USB Gaming Mouse Keyboard" (type: KEYBOARD, id 22)
[  2098.276] (**) Option "xkb_layout" "fr"
[  2099.009] (II) modeset(0): EDID vendor "BOE", prod id 2868
[  2099.009] (II) modeset(0): Using EDID range info for horizontal sync
[  2099.009] (II) modeset(0): Using EDID range info for vertical refresh
[  2099.009] (II) modeset(0): Printing DDC gathered Modelines:
[  2099.009] (II) modeset(0): Modeline "1920x1200"x0.0  160.25  1920 1968 2000 2140  1200 1203 1209 1248 +hsync -vsync (74.9 kHz eP)
[  2099.049] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[  2099.059] (II) modeset(0): EDID vendor "BOE", prod id 2868
[  2099.059] (II) modeset(0): Using hsync ranges from config file
[  2099.059] (II) modeset(0): Using vrefresh ranges from config file
[  2099.059] (II) modeset(0): Printing DDC gathered Modelines:
[  2099.059] (II) modeset(0): Modeline "1920x1200"x0.0  160.25  1920 1968 2000 2140  1200 1203 1209 1248 +hsync -vsync (74.9 kHz eP)
[  2099.099] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[  2100.239] (II) modeset(0): Allocate new frame buffer 1920x1200 stride
[  2127.552] (II) modeset(0): EDID vendor "BOE", prod id 2868
[  2127.552] (II) modeset(0): Using hsync ranges from config file
[  2127.552] (II) modeset(0): Using vrefresh ranges from config file
[  2127.552] (II) modeset(0): Printing DDC gathered Modelines:
[  2127.552] (II) modeset(0): Modeline "1920x1200"x0.0  160.25  1920 1968 2000 2140  1200 1203 1209 1248 +hsync -vsync (74.9 kHz eP)
[  2127.580] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[  2132.465] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[  2135.203] (II) modeset(0): EDID vendor "BOE", prod id 2868
[  2135.203] (II) modeset(0): Using hsync ranges from config file
[  2135.203] (II) modeset(0): Using vrefresh ranges from config file
[  2135.203] (II) modeset(0): Printing DDC gathered Modelines:
[  2135.203] (II) modeset(0): Modeline "1920x1200"x0.0  160.25  1920 1968 2000 2140  1200 1203 1209 1248 +hsync -vsync (74.9 kHz eP)
[  2136.437] (II) modeset(0): EDID vendor "BOE", prod id 2868
[  2136.437] (II) modeset(0): Using hsync ranges from config file
[  2136.437] (II) modeset(0): Using vrefresh ranges from config file
[  2136.437] (II) modeset(0): Printing DDC gathered Modelines:
[  2136.437] (II) modeset(0): Modeline "1920x1200"x0.0  160.25  1920 1968 2000 2140  1200 1203 1209 1248 +hsync -vsync (74.9 kHz eP)
[  2136.468] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[  2149.429] (II) event25 - E-Signal USB Gaming Mouse: SYN_DROPPED event - some input events have been lost.
[  2149.435] (II) modeset(0): Allocate new frame buffer 1920x1200 stride
[  2149.529] (II) modeset(0): EDID vendor "BOE", prod id 2868
[  2149.529] (II) modeset(0): Using hsync ranges from config file
[  2149.529] (II) modeset(0): Using vrefresh ranges from config file
[  2149.529] (II) modeset(0): Printing DDC gathered Modelines:
[  2149.529] (II) modeset(0): Modeline "1920x1200"x0.0  160.25  1920 1968 2000 2140  1200 1203 1209 1248 +hsync -vsync (74.9 kHz eP)
[  2149.662] (II) modeset(0): EDID vendor "BOE", prod id 2868
[  2149.662] (II) modeset(0): Using hsync ranges from config file
[  2149.662] (II) modeset(0): Using vrefresh ranges from config file
[  2149.662] (II) modeset(0): Printing DDC gathered Modelines:
[  2149.662] (II) modeset(0): Modeline "1920x1200"x0.0  160.25  1920 1968 2000 2140  1200 1203 1209 1248 +hsync -vsync (74.9 kHz eP)
[  2149.690] (--) modeset(0): HDMI max TMDS frequency 225000KHz

When there is "no signal", I can move my mouse into the dead area.

I tried to use xrandr to control the outputs but the same issue is happening (no signal again).

I looked at https://wiki.archlinux.org/title/Intel_ … _Xe_driver and maybe this is my case because I have an intel N150 CPU (twin lake) and it's newer than tiger lake. The only problem is that I don't have linux 6.8 or above...

Offline

#12 2026-04-26 20:37:45

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,850

Re: HDMI external monitor limited to 1680x1050

The only problem is that I don't have linux 6.8 or above...

[  2097.682] Current Operating System: Linux arch 6.19.14-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Thu, 23 Apr 2026 06:56:44 +0000 x86_64
[  2097.806] (II) modeset(0): Output eDP-1 using initial mode 1920x1200 +0+0
[  2097.806] (II) modeset(0): Output HDMI-1 using initial mode 2560x1440 +1920+0
xrandr --output HDMI-1 --mode 1920x1080 --rate 60 --pos 0x0

does not work?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2026-04-26 21:15:08

loan34k
Member
Registered: 2026-04-18
Posts: 11

Re: HDMI external monitor limited to 1680x1050

seth wrote:

The only problem is that I don't have linux 6.8 or above...

[  2097.682] Current Operating System: Linux arch 6.19.14-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Thu, 23 Apr 2026 06:56:44 +0000 x86_64
[  2097.806] (II) modeset(0): Output eDP-1 using initial mode 1920x1200 +0+0
[  2097.806] (II) modeset(0): Output HDMI-1 using initial mode 2560x1440 +1920+0
xrandr --output HDMI-1 --mode 1920x1080 --rate 60 --pos 0x0

does not work?

I used the kernel settings to test the new Xe driver, rebooted, put

xrandr --output HDMI-1 --mode 1920x1080 --rate 60 --pos 0x0

And it worked. I tested other resolutions or refresh rates but the interesting ones does not work (1440@59.95 or 1080@120)

Offline

#14 2026-04-27 09:04:49

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,850

Re: HDMI external monitor limited to 1680x1050

[  2149.690] (--) modeset(0): HDMI max TMDS frequency 225000KHz

Does this change w/ xe?
Or does it help to re-attach the monitor?

From your EDID

  Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
    Source physical address: 2.0.0.0
    DC_36bit                                                  
    DC_30bit                                                  
    DC_Y444                                                   
    Maximum TMDS clock: 225 MHz
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  Vendor-Specific Data Block (HDMI Forum), OUI C4-5D-D8:
    Version: 1                                                
    Maximum TMDS Character Rate: 600 MHz
    SCDC Present                                              
    Supports 12-bits/component Deep Color 4:2:0 Pixel Encoding
    Supports 10-bits/component Deep Color 4:2:0 Pixel Encoding

Does it help to add 

intel_idle.max_cstate=1 i915.enable_dc=0 ahci.mobile_lpm_policy=1

resp 

intel_idle.max_cstate=1 xe.enable_dc=0 ahci.mobile_lpm_policy=1

to the https://wiki.archlinux.org/title/Kernel_parameters ?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#15 2026-04-27 11:26:11

loan34k
Member
Registered: 2026-04-18
Posts: 11

Re: HDMI external monitor limited to 1680x1050

I tried to add 

 intel_idle.max_cstate=1 xe.enable_dc=0 ahci.mobile_lpm_policy=1

with xe enabled but that didn't solve the issue.

I diabled xe and put 

 intel_idle.max_cstate=1 i915.enable_dc=0 ahci.mobile_lpm_policy=1

and it didn't work too

btw I don't know why but

 xrandr --output HDMI-1 --mode 1920x1080 --rate 60 --pos 0x0

doesn't work anymore

Offline

#16 2026-04-27 16:03:14

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,850

Re: HDMI external monitor limited to 1680x1050

doesn't work anymore

Likewise not w/ the xe module?

Does it still say 

[  2149.690] (--) modeset(0): HDMI max TMDS frequency 225000KHz

Do you happen to have another monitor (to rule out the EDID setting) and in any event try the LTS kernel and a different cable.
225 MHz will get you 1080p60 at most.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#17 2026-04-27 18:04:46

loan34k
Member
Registered: 2026-04-18
Posts: 11

Re: HDMI external monitor limited to 1680x1050

With or without the xe module, it doesn't work.
The max TMDS frequency is still the same.
Using the lts kernel doesn't change anything, same for changing the cable.

I tried to plug in another monitor with the same cable and it worked as normal in 1920x1080@60 (Its higher resolution and refresh rate)

So I don't know what's the issue because a random samsung screen is working fine in 1920x1080@60 but my asus one doesn't work on the same resolution...

Offline

#18 2026-04-27 19:24:19

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,850

Re: HDMI external monitor limited to 1680x1050

Check the EDID of the samsung one.
https://github.com/linuxhw/EDID/blob/ma … 0684DA36AD
converted to binary, https://paste.c-net.org/SuspendInjected
https://wiki.archlinux.org/title/Kernel … s_and_EDID

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB