Arch Linux

Illium

Member

Registered: 2026-02-11

Posts: 6

FluxCast - Miracast/WFD screen casting from Linux to a TV

Hello everyone,
A few days ago I posted on Reddit complaining that casting to a Samsung TV on Hyprland is still a nightmare in 2026.
I`ll try to write my own solution on python. firstone be on dlna with default python http.server (and ffmpeg like that stuff) and it works! but... not very good.
I had a biiiig delay. But someone explained why my 20s delay was happening (HLS chunking, buffering and more more more), and instead of just fixing that I ended up rewriting the whole thing from scratch to real Miracast.
It now actually works!!! real Miracast. Wi-Fi Direct, full RTSP handshake, ~1 second latency, video + audio. Not DLNA with a TV player buffering everything, actual WFD the way Windows does it.

github: https://github.com/IlyaP358/fluxcast

original threads: 1 https://www.reddit.com/r/archlinux/comm … nux_still/
                               2 https://www.reddit.com/r/archlinux/comm … client_in/

Still rough around the edges, wf-recorder only so Hyprland/Sway for now, some hardcoded Samsung stuff that needs to become proper device profiles. PipeWire backend for KDE/GNOME is in progress.
If anyone wants to test on a non-Samsung TV or non-Hyprland setup I'd really appreciate it!

Run python3 main.py --doctor first to check if your system is ready.

Thanks! =]

5hridhyan

Member

Registered: 2025-12-25

Posts: 1,120

Re: FluxCast - Miracast/WFD screen casting from Linux to a TV

Miracast won't work w/o P2P right?

iw list | grep -A 10 "Supported interface modes"
	Supported interface modes:
		* IBSS
		* managed
		* AP
		* AP/VLAN
		* monitor
	Band 1:
		Capabilities: 0x19ef
			RX LDPC
			HT20/HT40
			SM Power Save disabled

I'm on a Realtek RTL8822CE

└─$ lspci | grep -i network
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822CE 802.11ac PCIe Wireless Network Adapter

also it flags the hardware gaps at the bottom. It seems like for this chipset, the WFD path is a no-go.

└─$ python3 main.py --doctor
[FluxCast Doctor] System capability report
[FluxCast Doctor] Miracast/WFD is not confirmed yet; check warn/fail rows above.

  Status Check                  Details
  ------ ---------------------- ------------------------------------------
  ok     python                 runtime (3.14.4 on Linux 7.0.3-arch1-2)
  ok     ffmpeg                 video/audio transcoding (/usr/bin/ffmpeg)
  warn   wf-recorder            Wayland/wlroots screen capture (not found in PATH)
  ok     pactl                  PulseAudio/PipeWire-Pulse audio monitor detection (/usr/bin/pactl)
  ok     xrandr                 X11 monitor detection fallback (/usr/bin/xrandr)
  ok     nmcli                  NetworkManager Wi-Fi Direct control (/usr/bin/nmcli)
  ok     iw                     kernel Wi-Fi interface inspection (/usr/bin/iw)
  ok     wpa_cli                active Wi-Fi Direct scan/control (/usr/bin/wpa_cli)
  ok     gdbus                  passive wpa_supplicant D-Bus capability checks (/usr/bin/gdbus)
  ok     gst-launch-1.0         optional future WFD GStreamer pipeline (/usr/bin/gst-launch-1.0)
  ok     gst-inspect-1.0        optional future WFD codec inspection (/usr/bin/gst-inspect-1.0)
  ok     ffmpeg encoders        H.264 and AAC encoders are available (h264=libx264, h264_vaapi, h264_nvenc, h264_qsv, h264_v4l2m2m; aac=yes)
  ok     screen capture         X11 capture path is available (DISPLAY=:0; xrandr=/usr/bin/xrandr)
  ok     audio capture          default audio monitor can be derived (alsa_output.pci-0000_04_00.6.analog-stereo.monitor)
  warn   NetworkManager         Wi-Fi is visible, but no P2P device was listed (nmcli tool, version 1.56.0-1; wlp3s0:wifi:connected | lo:loopback:connected (externally) | eno1:ethernet:unavailable)
  warn   iw P2P                 Wi-Fi interfaces exist, but no P2P-device was shown (phy#0 | 	Interface wlp3s0 | 		ifindex 3 | 		wdev 0x1 | 		addr bc:f4:d4:84:bd:87 | 		ssid VARASIDDHI-5g | 		type managed | 		channel 44 (5220 MHz), width: 80 MHz, center1: 5210 MHz | 		txpower 20.00 dBm | 		multicast TXQ: | 			qsz-byt	qsz-pkt	flows	drops	marksoverlmt	hashcol	tx-bytes	tx-packets | 			0	0	0	0	0	0	0	0		0)
  warn   wpa_supplicant P2P     supplicant capability query failed (Error: GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Sender is not authorized to send message)
  warn   wpa_supplicant WFD     WFDIE query failed; supplicant may lack CONFIG_WIFI_DISPLAY (Error: GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Sender is not authorized to send message)

Just wanted to share this so you have more data on which chipsets are struggling with the WFD implementation!

---

You'll definitely find me talking to a wall

Illium

Member

Registered: 2026-02-11

Posts: 6

Re: FluxCast - Miracast/WFD screen casting from Linux to a TV

Thanks for the data, really useful!
You're right, without P2P in the interface modes WFD won't work, that's a hardware/driver limitation, not something FluxCast can work around.
Realtek's Linux drivers have historically had poor P2P support compared to Intel.
Your --doctor output is interesting though - X11 capture path is available but not tested very vell, so if you ever want to try DLNA fallback mode it should work:
python3 main.py --protocol dlna --transport hls

Won't be as low latency as WFD but at least gets something on the TV...I hope. Worth trying if you have a DLNA-capable TV!