I AUR nvidia-390xx-dkms and reboot and failed

citrineotter · Yesterday 15:33:45

The installation seem to be working fine, until I reboot my machine and my connected is none instead of the usual VGA-1

$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
None-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768      60.00*+
  1920x1080_60.00 (0x241) 173.000MHz -HSync +VSync
        h: width  1920 start 2048 end 2248 total 2576 skew    0 clock  67.16KHz
        v: height 1080 start 1083 end 1088 total 1120           clock  59.96Hz

and here is for lspci

$ lspci -k -d ::03xx
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 730] (rev a1)
	Subsystem: NVIDIA Corporation Device 0000
	Kernel modules: nouveau

CPU : Intel(R) Core(TM) i7-6700
GPU : NVIDIA GeForce GT 730 Ghz
OS : Arch Linux x86_64
Kernel : Linux 7.2.11-arch1-1

Last edited by citrineotter (Yesterday 15:55:07)

seth · Yesterday 15:44:13

You're running on the simpledrm device because nvidia-utils blacklists nouveau and the nvidia module wasn't built.
Probably lacking linux-headers?

V1del · Yesterday 15:47:10

Please use [code][/code] tags instead of markdown and edit your post in this regard.

A DKMS package has an implied requirement on the kernel header that is not directly enforceable due to many different kernels existing, is linux-headers installed? You need to check the pacman output when doing either install on whether the nvidia package managed to build properly.

Edit: F5ck...

Last edited by V1del (Yesterday 15:47:43)

citrineotter · Yesterday 16:01:31

So I install linux headers and reinstall AUR of nvidia-390xx-dkms and this is the result

lspci -k -d ::03xx
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 730] (rev a1)
	Subsystem: NVIDIA Corporation Device 0000
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia

with check with xrandr none still in the output list

xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
None-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768      60.00*+
  1920x1080_60.00 (0x241) 173.000MHz -HSync +VSync
        h: width  1920 start 2048 end 2248 total 2576 skew    0 clock  67.16KHz
        v: height 1080 start 1083 end 1088 total 1120           clock  59.96Hz

Last edited by citrineotter (Yesterday 16:02:14)

seth · Yesterday 16:03:08

Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

citrineotter · Yesterday 16:07:17

$ grep -e Log -e tty Xorg.0.log
grep: Xorg.0.log: No such file or directory

$ grep -e Log -e tty Xorg.0.log
grep: Xorg.0.log: No such file or directory

seth · Yesterday 16:14:24

no grep, the link is to explain where to find the log.
Don't blindly copy-paste random code you don't understand.

citrineotter · Yesterday 16:29:54

I think it's this?

manhattan-femboy  ~  ♥ 23:24  tail -f /var/log/Xorg.1.log
[   588.935] (II) UnloadModule: "libinput"
[   588.935] (II) UnloadModule: "libinput"
[   588.935] (II) UnloadModule: "libinput"
[   588.935] (II) UnloadModule: "libinput"
[   588.935] (II) UnloadModule: "libinput"
[   588.935] (II) UnloadModule: "libinput"
[   588.935] (II) UnloadModule: "libinput"
[   588.936] (II) UnloadModule: "libinput"
[   588.945] (II) NOUVEAU(0): NVLeaveVT is called.
[   589.070] (II) Server terminated successfully (0). Closing log file.

this is from /var/log/Xorg.1.log
also here is with cat instead of just tail
https://pastebin.com/DJ7wsvSd

citrineotter · Yesterday 16:59:05

I thought problem might be with utils since my nouveau still here so I try to install and as far as I know it seen it already was here

sudo pacman -S nvidia-utils
resolving dependencies...
looking for conflicting packages...
:: nvidia-utils-615.78.08-1 and nvidia-390xx-utils-390.157-24 are in conflict (nvidia-libgl). Remove nvidia-390xx-utils? [y/N] n
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: nvidia-utils-615.78.08-1 and nvidia-390xx-utils-390.157-24 are in conflict

don't know why my nouveau still around tho

citrineotter · Yesterday 17:35:57

So! I tried to blacklist my nouveau directly with scripts and then as I see that hdmi have suppose now I switch my cable to hdmi! well there a problem in boot when it said input not support but I estimate time and wait and then it work now! I think the input not support part will still occured every time I boot my pc up so if there is a way to fix that

seth · Yesterday 18:14:59

That's not the correct log but 1 week old, you're looking for the Xorg.0.log
The nouveau mentioned in the Xorg log is the xf86-video-nouveau ddx driver, but while that won't be loaded if you're using the nvidia kernel module it's not directly indicating the nouveau kernel module being somehow used.
Do not install nvidia-anything from the repos, you need the nvidia-390xx packages from the AUR

So let's have a look at the actual Xorg log to see where we're at?

WorMzy · Today 01:54:28

Mod note: moving to AUR Issues.

Arch Linux

#1 Yesterday 15:33:45

I AUR nvidia-390xx-dkms and reboot and failed

#2 Yesterday 15:44:13

Re: I AUR nvidia-390xx-dkms and reboot and failed

#3 Yesterday 15:47:10

Re: I AUR nvidia-390xx-dkms and reboot and failed

#4 Yesterday 16:01:31

Re: I AUR nvidia-390xx-dkms and reboot and failed

#5 Yesterday 16:03:08

Re: I AUR nvidia-390xx-dkms and reboot and failed

#6 Yesterday 16:07:17

Re: I AUR nvidia-390xx-dkms and reboot and failed

#7 Yesterday 16:14:24

Re: I AUR nvidia-390xx-dkms and reboot and failed

#8 Yesterday 16:29:54

Re: I AUR nvidia-390xx-dkms and reboot and failed

#9 Yesterday 16:59:05

Re: I AUR nvidia-390xx-dkms and reboot and failed

#10 Yesterday 17:35:57

Re: I AUR nvidia-390xx-dkms and reboot and failed

#11 Yesterday 18:14:59

Re: I AUR nvidia-390xx-dkms and reboot and failed

#12 Today 01:54:28

Re: I AUR nvidia-390xx-dkms and reboot and failed

Board footer